| |
Engineering Power Conversion Solutions
Kinetics Industries, established in
1939, is an integrated manufacturer
of highly reliable and durable SCR
regulated and diode line-regulated
power rectifiers, industrial DC power
supplies, fuseless bolted fault rated
magnet rectifiers and more.
Brush
Type Synchronous Motors Excitation
Systems
Typical components of a brush type
motor
excitation system:
Primary disconnect or line protection.
Exciter power isolation transformer
(EPT)
Rectifying exciter – regulated
or constant potential
Application logic / control. –
KinetSync-SR
Complete
Integrated Excitation System
The Kinetics model type ESR is a product
designation for a excitation system
that contains, as a minimum, an exciter
and a solid state field application
circuitry.
Constant
Potential, Non Regulated Brush Type
Synchronous Motors
The Kinetics models MVR & CVR
are heavy duty, AC line regulated
"CP" diode rectifiers designed
and rated for highly inductive loads.
Regulated
Voltage Output
The Kinetics model SVRS is a heavy
industrial, solid state, limited operating
range, closed loop regulation, SCR
excitation rectifier.
Regulated
Current Output
The Kinetics model SVRS-CR is a heavy
industrial, solid state, limited operating
range, closed loop regulation, SCR
excitation rectifier.
Regulated
Power Factor/Voltage Output
Kinetics’ power factor regulated
units incorporate a combination power
factor and voltage regulated system.
PF is regulated within an adjustable
minimum to maximum range.
Regulated
Remotely Supplied Signal
The Kinetics model SVRS-Y is a heavy
industrial SCR regulated output rectifier
with the DC output voltage or current,
adjusted or stabilized based on a
control signal supplied from a remote
supplied source. T
KinetSync-SR
Digital Annunciation Module
KinetSync-SR provides protection and
control needed for the specific application
of "Brush" or "Slip
Ring" type Synchronous Motors.
Regulated
Exciter w/KinetSync-SR Relay
The Kinetics model KVR is a combination
system of the Kinetics KinetSync-SR
digital logic controller and annunciation
module for brush type motors and a
Kinetics SVRS regulated exciter.
Regulated
Exciter w/SPM Application Relay
The Kinetics model KSPM and KSPM-P
are regulated exciters with the Kinetics
Synchapp-SS solid state field application
package and interfaces circuitry to
operate in with the GE Multlin SPM
and SPM-PF synchronous motor controller
modules.
Contactor
Applied Field Package
The Kinetics model type SynchApp-C
motor field application system incorporates
solid state sensing of the motor field
characteristics for the application
of the field to the motor via heavy
industrial, mill duty, electro-mechanical
DC contactors operating in conjunction
with an AC motor starter.
Brushless
Type Synchronous Motors Excitation
Systems
Kinetics designs and manufactures
a family of "off shaft"
excitation products specifically for
the application of brushless synchronous
motors.
Constant
Potential Exciter
Kinetics exciter units are designed
specifically for the high transient
power spikes and surges associated
with highly inductive loads.
Regulated
Output Exciter
The Kinetics model type KNB1 exciter
regulator is a single phase input,
hybrid bridge, SCR regulated rectifier
specifically designed for the application
of providing regulated DC output to
the field of a rotating exciter on
the common shaft with the motor rotor.
KinetSync-NB
Digital Annunciation Module
KinetSync-NB provides protection and
control needed for the specific application
of "Brushless Synchronous Motors".
Exciter
& KinetSync-NB Logic Relay
The Kinetics model type ENB is a combination
system of the KinetSync-NB digital
logic controller and annunciation
module and the Kinetics KNB1 brushless
motor exciter regulator. The ENB system
provides sequencing of the control
for interfacing with the internal
motor controls to provide protection
from incomplete sequence faults, motor
running faults and annunciation of
motor operational status.
Exciter
w/SPM Relay
The Kinetics model type ENB-SPM is
a combination system of the Kinetics
KNB1 brushless motor exciter regulator
and SPM module.
Independent
Operation AC Generator Excitation
Regulator
Kinetics Control Systems SVRI Exciter/Regulator
rectifier is designed and rated in
capacity for the application of exciting
the DC fields of an AC generator operating
independently with other generators
and/or NOT tied into a utility power
grid.
"Soft
Grid" & Parallel Operation
AC Generator Excitation Regulator
The Kinetics model SVRSP Exciter/Regulator
rectifier is designed and rated in
capacity and operating parameters
for the application of exciting the
DC fields on an AC generator operating
in parallel with other AC generators
and the power system is a "soft
system" in relation to loading.
"Stiff
Grid" & Parallel Operation
AC Generator Excitation Regulator
The Kinetics model SVRFP Exciter/Regulator
rectifier is designed and rated in
capacity and operating parameters
for the application of exciting the
fields on an AC generator in parallel
with other AC generators and the power
system is a "stiff system"
in relation to loading.
Company
Biography
Kinetics Industries was founded
in 1939 to service power systems and
industrial motor needs of the region's
heavy industrial customers.
Press
Releases
Trade
Shows
Warranty
Statement
Equipment manufactured by Kinetics
Industries, Inc., is guaranteed for
a period of one year from the date
of shipment against defects in materials
and/or workmanship and to operate
in accordance with our proposals,
specifications and name-plate data
under conditions of proper installation,
rated load, environment and usage.
Terms
of Sale
Standard terms and conditions of sale.
Request
Insurance Certificate
Employment
Vendor
registration / W-9 taxpayer certification
RFQ
Parts
Request
O&M Manuals
KinetSync
- NB Instruction Manual
The KinetSync-NB monitors the starting
and running condition of a Brushless
synchronous motor.
KinetSync
- SR Instruction Manual
The KinetSync-SR It monitors the starting
and running condition of a brush-type
synchronous motor.
Technical
Papers
Sample
Specifications
Lock
Box
Access Code Required
|
|
Constant Potential Non-Regulated Rectifiers
The Kinetics model types CVR &
MVR are static, open loop, AC line
regulated, AC to DC voltage conversion
rectifiers in the 1 to 2000 Kw capacity
range.
Regulated,
SCR, Rectifiers 1-2000Kw
The Kinetics model type SVR is a stabilized
or adjustable output, direct current,
solid state, closed loop, fully controlled
phase shifted, semi-conductor, heavy
industrial rectifier system.
Crane
Rectifiers
Kinetics’ wide ranging product
line of crane and material handling
power supplies, offers customers a
selection of product solutions specifically
designed for maximum operational productivity,
dependable service and long product
life.
Material
Handling Application Guide
Magnet
Rectifiers
Kinetics’ wide ranging product
line of magnet power supplies, offers
customers a selection of product solutions
specifically designed for, highly
inductive load, magnet applications.
Traditional
Fused Power Supplies
The model type MVR is a “traditional”
heavy industrial AC input line regulated
diode rectifier in the 1 to 20 KW
range.
JVR
Fuseless Rectifiers
Kinetics Industries designs and manufactures
the highly reliable, production oriented,
"J" SPEC rectifier that
is specifically designed and rated
for demanding heavy industrial and
scrap yard applications, where short
circuits on the DC bus are common
or probable.
Fuseless
Flux Forcing Rectifiers
The model type JVR-FF is a high production,
two DC voltage step fuseless diode
rectifier system designed to obtain
maximum production performance form
material lifting magnets.
Select-A-Pick
Regulated Rectifiers
The model type SVRJ is a fuseless
- SCR regulated rectifier with the
capacity to select a desired voltage
to the magnet and ramp to a full voltage
for carrying the load and then reduce
voltage for a controlled drop of the
load.
Separation
Magnet Rectifiers
The model type WVR is specifically
designed for the relatively stable
loading demands of operation of waste
or conveyor metal separation magnet
systems with a 100% continuous magnet
“power on” operation duty
cycle.
Mill
Duty DC Substations
Match & lineup combination of:
primary side load break switch &
fuse, no-fuse disconnect, circuit
breaker or magnetic conductor; feeding
an isolation transformer that provides
the optimal AC voltage to a Kinetics
non-regulated, regulated or SCR motor
drive rectifier.
Regenerative
Absorption Circuit
The Kinetics model RGA consists of
a bank of mill duty resistors, voltage
sensitive circuitry and a mill duty
DC contactor to apply the resistor
bank across the DC bus to absorb regenerative
energy when it is present.
Test
Power Rectifiers
Over the past 45 years, Kinetics has
designed and manufactured various
types of power rectifiers for traction
test applications that include both
power and electronic loads.
Traction
Rectifiers
Kinetics Industries manufactures both
constant potential diode rectifiers
and SCR regulated output rectifiers
for transit / traction applications.
Traction
Test Rectifiers
Over the past 45 years, Kinetics has
designed and manufactured various
types of power rectifiers for traction
test applications that include both
power and electronic loads.
Low
Voltage/Filtered Rectifiers &
Power Supplies
Specialty application AC to DC conversion
to military, laboratory and industrial
specifications.
Avionics
Hanger Support Rectifiers/Power Supplies
Kinetics manufactures a family of
regulated and non-regulated output,
DC power supply rectifiers, specifically
designed, manufactured and tested
to meeting the electrical and mechanical
construction demands of avionic applications.
Eddy
Current Clutch Rectifiers
The Kinetics SVR1-EC speed-regulated,
eddy current clutch field exciter
is a SCR regulated rectifier system
specifically designed for the application
of supplying regulated variable DC
power, via a closed feedback loop
system, to the field coil of an eddy
current clutch adjustable speed drive.
Magnetic
Brake & Clutch Power Supplies
The Kinetics model type BPP is a heavy
industrial, constant potential, diode
power supply with solid state switching
from a "charge" voltage
to an economizing "hold"
voltage for the operation of DC magnetic
brake or clutch coils.
Circuit
Breaker Coil Operation Power Supplies
The Kinetics model PPB is a line regulated,
high current in-rush loading, diode
power supply, specifically designed
for the operation of circuit breaker
DC trip coils and relays.
AC
to DC Power Conversion for Elevators,
Fire Pumps & Misc. Loads
The Kinetics model type GVR is a constant
potential diode rectifier with regenerative
absorption protection circuit specifically
designed and manufactured for elevators,
fire pumps and various loads commonly
found on a utility DC distribution
network.
Dry
Type Transformers 500 VA to 2,500
KVA
Kinetics designs and manufactures
high quality, conservatively rated,
dry type transformers in the 1 KVA
to 2,500 KVA capacity range, up to
15 KV class.
DC
Motor to AC Alternator Emergency Power
System
Kinetics Industries has designed,
manufactured and time tested, in transit
/ traction applications, a highly
reliable, "stand-by" emergency
power, traction duty, DC to AC motor
alternator set system.
Specialty
Sheet Metal Enclosures
Kinetics Industries, at our Trenton,
New Jersey manufacturing plant, has
a complete sheet metal fabrication
facility for the design and manufacture
of all our electrical enclosures,
panels, brackets, bus work and transformer
framing.
Telephone
and Email Contact Information for
Kinetics Industries
A listing of email and extensions
for contacts at Kinetics Industries
Mail
and Shipping Address
140 Stokes Ave.
Trenton, NJ 08638
Directions
and Map
Travel directions to Kinetics Industries
Request
Information
Selling
to Kinetics
Engineering
Services
Kinetics Industries has a staff of
field service engineers available
to perform unit start-ups, operation
training and technical field services
on all the products we manufacture.
Rate
List
|
|
